Featured 1 | MillRight CNC, LLC

MillRight CNC Power Route Kit Bundle

Product Info

Capabilities:
Mills wood, plastic, foam, carbon fiber, circuit boards, soft metals, and can make occasional light cuts in hard metals. This machine is our most precise and has material removal rates of up to 15 times that of our other machines.

Working Area:
Approximately 25”×25”×5”

Footprint:
About 39″ deep × 49″ wide by 29″ high. 12″ of the width is the electronics enclosure that sits to the left side. 5″ of the depth comes from the Y motor on the front that is above the table surface.

Warranty

There is a 180-day warranty on this product. No returns or cancellations are permitted once the order has left our facility.

We provide free technical support for this product.

Shipping

Due to its size and weight, the website only calculates shipping on the Power Route to the contiguous 48 United States at this time. Please contact sales@millrightcnc.com if you want to make an arrangement for other shipping locations.

Software is not included but everything you need is available for FREE. See the FAQ page.

$2,795.00 – $2,999.00 Select options

Mega V Router Bundle

Product Info

Expect web orders placed now to ship April 2020. Our system will charge your card at the time of order.

Capabilities:
Mills wood, plastic, foam, carbon fiber, circuit boards, soft metals, and can make occasional light cuts in hard metals.

Working Area:
Approximately 19x19x3.75″ (standard model)
Approximately 35x35x3.75″ (XL model)

Footprint:

The overall footprint depends on whether you put the control box to the left of the machine or on a shelf up underneath. Not counting the control box, the 35×35″ machine is 42″ deep by 48″ wide and the 19×19″ machine is 27″ deep and 33″ wide. The electronics control box is about 12×12″. The router version is 19″ tall.

The weight of the machine depends on a couple of factors, such as whether you have a T plate bed or standard MDF bed. Generally speaking, the 19×19″ router weights about 100 pounds. The 35×35″ router weighs about 175 pounds.

Warranty

There is a 180-day warranty on this product. No returns or cancellations are permitted once the order has left our facility.

We provide free technical support for this product.

Shipping

THIS ITEM IS HIGH DEMAND AND WILL NOT SHIP UNTIL APRIL.

Software is not included but everything you need is available for FREE. See the FAQ page.

$1,489.00 – $2,807.00 Select options

MillRight CNC Carve King Kit Bundle

Product Info

Software is not included but everything you need is available for FREE. See the FAQ page.

Capabilities:
Mills wood, plastic, foam, carbon fiber, circuit boards, and soft metals. This machine can make higher precision and more aggressive cuts than our M3.

Working Area:
Approximately 17.25”×17.25”×4”

Footprint:
On table footprint of 25″×30″, counting the 4″ inch square electronics enclosure that goes at the back left. With overhands of motors above the table it is 28″×30″×17″.

What’s included:
All the hardware items you need to get going. You get the machine parts kit, a DeWalt DWP611 router, router mount, an end mill, and basic clamps.

Warranty

There is a 90-day warranty on this product. No returns or cancellations are permitted once the order has left our facility.

We provide free technical support for this product.

$869.00 – $1,039.00 Select options

MillRight CNC M3 Kit Bundle

Product Info

Software is not included but everything you need is available for FREE. See the FAQ page.

Capabilities:
Mills wood, plastic, foam, carbon fiber, circuit boards, and soft metals.

Working Area:
Over 10.25”×10.25”×2” (260mm × 260mm × 50mm)

What’s included:
All the hardware items you need to get going. You get the machine parts kit, a DeWalt DWP611 router, router mount, an end mill, and basic clamps.

Shipping:

Shipping on this item starts at $29 domestic and increases based on options and other products added. The total will be calculated in your shopping cart.

Refund Policy and Product Warranty

We can refund an order, less the 3% fee that our processor does not return to us, prior to shipment. No refunds are permitted after shipment. We will replace any part that may become defective within 90 days of shipment.

$499.00 – $679.00 Select options

Mega V Plasma Version

Product Info

Due to high demand, an order placed today will ship in April. Our system will charge your card at the time of order.

Capabilities:
With the appropriate plasma cutter, could sever cut steel up to 1″ thick.

Working Area:
Approximately 35x35x3.75″ (XL model)

Footprint:

The footprint of the machine is 43″ deep by 48″ wide. The 35×35″ plasma version weighs about 375 pounds.

Warranty

There is a 180-day warranty on this product. No returns or cancellations are permitted once the order has left our facility.

We provide free technical support for this product.

Shipping

THIS ITEM IS ON PRE-ORDER AND WILL NOT SHIP UNTIL MARCH. It only ships to the contiguous United States. It comes via truck freight with lift gate service and is a flat $289.

Software is not included but everything you need is available for FREE. See the FAQ page.

$2,599.00 – $3,487.00 Select options

Premium Super 7 Watt Laser with High Resolution Lens

This is the newest SUPER 7 watt diode laser from JTECH Photonics with a high resolution lens. These integrate directly into any of our machines. Engrave on wood, leather, acrylics, and many other materials Cut thin and non dense woods like Balsa, … Read More

$724.99 Add to cart

Sale!

CLEARANCE Premium 7 Watt Laser Kit

ON CLEARANCE DUE TO RELEASE OF NEW SUPER 7 WATT LASER. This is the very popular JTech Photonics 7 watt Laser Kit. JTech Photonics has customized these for MillRight CNC with a cable length appropriate for the Carve King, … Read More

$599.00 Select options

Premium 2.8 Watt Laser Kit

This is the very popular JTech Photonics 2.8W Laser Kit. JTech Photonics has customized these for MillRight CNC with a cable length appropriate for the Carve King. This will work with the MillRight CNC M3 too. We also add a laser mount … Read More

$345.00 Select options

Vacuum Clamping Fixture with Vacuum Generator

This is a great way to hold down parts by vacuum clamping force. This is everything you need except for a compressor to hold down parts by vacuum. There are two plenum sizes to choose from. Each plenum can clamp down smaller parts as well as parts slightly larger than the plenum itself.

You can hold down woods, plastics, printed circuit boards, sheet metal and metal plates by vacuum power alone!

$184.00 – $299.00 Select options