» » » 8″ Manual Lathe with Accessory Package

8″ Manual Lathe with Accessory Package

$1,139.00

Capabilities:
Aluminum, brass, plastics, free machining steel, and other materials

Working Capacity:
This lathe is capable of turning a 3.5″ (90mm) part over the bed. The fact that the lathe will turn to 3.5″ does not mean you can turn a 3.5″ diameter between centers because the crosslide would be in the way. The lathe will turn a part 1.875″ (48mm) over the crosslide. A A .405″ (10mm) diameter hole through the headstock allows long material up to that diameter to be fed through and worked on. This lathe has 8″ between centers.

What’s included:

8″ lathe with hand wheels, 2.5″ 3-jaw self-centering chuck, 1/4″ tailstock drill chuck w/ key, #0 Morse arbor, #1 Morse arbor with drawbolt, Steady rest, Live Center, Compound Slide, Cutoff Tool and Holder, 3-pc 1/4″ HSS Cutting Tool Set (LH, RH, Boring), 5/32″ T-driver, 3-pc Center Drill Set, Accessories Shop Guide Book, Thread Cutting Attachment

Category:

Description

This Sherline lathe can turn a part up to 3.5” in diameter over the bed or up to 1.88” over the carriage without riser blocks. The lathe has 8” of space between centers. The electronic speed control allows continuously variable speed control from 70 to 2800 RPM without belt changes. There is a second pulley position available that offers extra torque at low RPM if needed. This lathe is a good choice for clockmakers, modelers, or anyone making small parts. This is a MANUAL lathe, operated by turning the hand cranks. It is not CNC controlled.

This lathe has the following key features:

A powerful 90V DC motor with electronic speed controller (if selected)
2.75″ (70mm) x 6.0″ (152mm) crosslide.
15″ (381mm) steel bed to allow 8″ (203mm) between centers.
Standard 1-5/8″ (41mm) laser engraved aluminum handwheels.
Pulleys, drive belt, faceplate, lathe dog, two dead centers, three hexagonal keys, tool post, sharpened high-speed steel cutting tool, eight-foot three-wire power cord, and instruction manual.
Many other accessories are included in this package. Please see the “What’s Included” section above.

Additional information

Lathe Configuration

With M

There is a 365 day parts warranty on this product. Sherline will provide technical and warranty support for this product. There are no returns on this item once it has been shipped to you

This item will be shipped to you via FedEx, USPS, or UPS and usually ships within a few days of your order.