» » » Carve King 2 Mini Kit Bundle
Sale!

Carve King 2 Mini Kit Bundle

$799.00$839.00

CURRENTLY ON SALE FOR $150 OFF.

Capabilities:
Mills wood, plastic, foam, carbon fiber, circuit boards, and soft metals.

Working Area:
Approximately 8”×9”×4”

Footprint:
On table footprint of 19.5″×15.75″, counting the 4″ square electronics enclosure that goes at the back left. With overhands of motors above the table it is 21.75″×18.5″×17″

What’s included:
All the hardware items you need to get going. You get the machine parts kit, a Makita RT0701C router, router mount, an end mill, and basic clamps.


Warranty

There is a 90-day warranty on this product. No returns or cancellations are permitted once the order has left our facility. We provide free technical support for this product with proof of original purchase.


Software is not included but everything you need is available for free. See the FAQ page. We also have Vectric software available for purchase here.

Clear selection
SKU: N/A Category:

Description

ON SALE! ORDER NOW AND GET $150 OFF.

THE CARVE KING 2 MINI HAS A 4 WEEK LEAD TIME TO SHIPMENT FROM THE TIME OF ORDER. 

The Carve King 2 is now available in a smaller footprint as the Carve King 2 Mini! The Carve King 2 is a leap forward in affordable CNC. It builds on the years of customer feedback on our very successful original Carve King. The Carve King 2 has an upgraded frame design that increases rigidity, improved electronics allowing for 20% faster traverse speeds, and was re-designed to allow for easier assembly. The control board is also now compatible with our precision touch plate.

This bundle includes the Carve King 2 Minit kit, Makita 1.25HP RT0701C router, our solid aluminum router mount, one 1/4″ carbide end mill, and basic clamps. This is all the hardware you need to get going

Standard Features:
All aluminum frame
Custom aluminum extrusion in subframe
Improved gantry bearing plate
Trapezoidal stainless lead screws with POM anti-backlash nuts on every axis
V channel rails with precision turned Acetron V wheels and double shielded bearings
High torque NEMA 17 stepper motors with dual drive on the Y axis
Custom made MillRight CNC control and interface boards connected to an Uno board running GRBL firmware
Fan cooled and prewired electronics enclosure
Drag chains for wire management
Stainless steel work clamps included
1/4″ 2 Flute carbide end mill included

Available features (additional cost):
Homing switch kit that includes 3 snap switches, switch brackets, hardware, and wiring.

The software you need is free. Autodesk offers all hobbyists a free license (not a trial) for design software called Fusion 360. Note that Fusion no longer outputs rapid traverses for those on a free personal license, but you can easily overcome this with our G Code Rapidizer. You can control the machine with the MillRight CNC version of Universal G Code Sender, which is free on our resources page. We also sell Vectric software. Check out our software offerings at https://millrightcnc.com/product-category/software/

Need a bigger machine? Check out the Carve King 2 or the Mega V